Used Hitachi ZX55-5A Crawl Excavator 0.19m³ Bucket Capacity Little Used Excavator

A single axial piston motor is used to provide precise steering control. The traveling hydraulic motor is two variable axial piston motors, which can adapt to the speed requirements of different working scenarios, and travel smoothly and flexibly.
The maximum flow rate reaches 1×120L/min, which provides sufficient working fluid pressure to ensure the stable and efficient operation of the hydraulic system.

The pressure of traveling hydraulic circuit reaches 24.5MPa, and the pressure of rotary hydraulic circuit is 18.3MPa, which ensures the working ability of the equipment under high load or complex environment.
Stable pilot oil circuit pressure and pilot line flow control make the operation more accurate and responsive.

Equipped with large-capacity bucket cylinders, bucket rod cylinders and boom cylinders, it enhances the digging, handling and working capacity of the equipment. This allows the machine to excel in heavy-duty operations or complex tasks.
Thanks to the use of high quality axial piston pumps and motors, as well as high strength cylinders, the equipment offers high durability and reliability, reducing maintenance and downtime.

The advanced design of this equipment is adaptable to a wide range of work environments and task requirements, and it performs well on both construction sites and in agriculture.

A four-stroke engine completes an operating cycle through four strokes: suction, compression, combustion and exhaust, and is more efficient than a two-stroke engine. The advantages are improved combustion efficiency, lower fuel consumption, as well as reduced noise and vibration.

Water-cooled engines use water as the coolant, which is cooled inside the engine by circulating water. This type of cooling allows the engine to maintain a stable operating condition in a high temperature environment, avoiding performance degradation and damage caused by overheating. Water-cooled engines also have better thermal balance, which helps to reduce wear and tear on mechanical components and extend service life.

Direct-injection engines utilize technology that injects fuel directly into the cylinder, which allows the fuel to mix better with the air, resulting in improved combustion efficiency. This technology also allows for more precise fuel control, which can better respond to the driver's needs and provide better power and fuel economy. In addition, direct injection helps reduce emissions and improves the environmental friendliness of the engine.

Did you not find a satisfactory excavator?

Don't Worry!

If you want a specific type used excavator and cannot find in our web, you can also inquire to
our staffs about the used excavator that you need and requirements. And our company will try
our best to search in every used excavators market and warehouse all over the China and find
the suitable one for you as soon as possible.

Excavator, loader, roller, truck, crane, grader, forklift and other kinds engineering

machinery equipment and parts，including brands like: Caterpillar, Komatsu,

Hitachi, Kobelco, Volvo, Doosan, Hyundai, SANY, etc,.

Since 2016, Mingjue have expanded our business into foreign trade and focused

on one-stop customization of used engineering machinery products such as：

• used track excavators,
• used wheel excavators,
• used loaders,
• used bulldozer,
• used grader 
• used road 
• used crane 
• used forklift​

There are more than 3'000 second hand excavators and over ten kinds of construction

equipemnts in our warehouse. We has been pursuing best cost-performance used

excavators from construction companies and individual sellers all over the world

for our customers. 

To realize more demands, we also have cooperated with some famous domesticated

companies to get their products at low price.

Our company is committed to construction machinery exportation. There are more

than 100 countries we have corporated for decades.

1. Selling and reception: As a golden supplier, our company can provide various

selling service.If you have decided to visit our company in person, you can tell us

your information about your flightand we will make arrangements including the

transport and accommodation services.

2. Maintenance: Our company have brilliant machinery team to maintain all the

used excavator and other construction equipments, including regular maintenance,

trouble shooting, replacement of parts, etc, to avoid any potential quality problems.

3. Original auxiliary attachement and installment: Provide all kinds of original

excavator accessories in different brands including auger, breakerlog, grapple,

hydraulic quick hitch, rakeforklift and so on. And we can finish the installment

before shipment if you need.

4. Finance support: Provide customers with financial leasing, installment payment

and other financial solutions to help customers buy these used excavators more

convenient and flexibly.

5. Shipment: Provide flexible shipment which depends on client's request. We have

cooperated with relevant company which can provide many ways of shipping, such

as container, bulk cargo ship, flat rack, etc.

6. Warranty: Provide six months quality assurance for any problems of our products.

and the machine authentic warranty 

7. Technical training and support: Provide customers with operation training and

echnical support services to ensure that customers can operate used excavators

correctly and safely.

8. Designad modification project:according to the demands of customer to provide

the modification to make the machine working better and more efficient.

cases：

1.the modification of boom for rock

2.undercarriage elevating 1500mm height and safety guaranteed

Kunshan Mingjue Engineering Machinery Co., Ltd is one of the largest used

excavator and other construction equipments supplier in China. We provide

complete services and reasonable price for the customer all over the world.

1. Q: How do you ship the machine?
A: it depends on client's request. We have many ways of shipping, such as container,

bulk cargo ship, flat rack and ro-ro for your conference.

2. Q: How can I be sure that the machine is of good condition?
A: We will take the video while the machine is working, which is better for our

customers to check the machines in a dynamic way.

3. Q: How fast can you ship the machine?
A: it needs 5 working days after receiving the deposit.

4. Q: What's your payment ?
A: Our payment is 30% deposit, 40% before loading and 30% after receiving the

copy of B/L

Sale manager

has been engaged with dealing on used construction equipment, especially second

hand excavators for more than 8 years and specialized in negotiation on price and

services for you.